You love gardening, but it is hard to take care of it properly. Do you agree? You are watering it regularly, use pesticides for a healthy garden, but it is also essential to clean weeds.
And in this case, a pruning saw can be your solution. Why? Well, a pruning saw is pretty straightforward as it helps you to remove dead breaches, and also, offers tight safety protection.
But, you don’t know How to Use a Pruning Saw? Then don’t worry because you are in the right place. Here, we are going to show you a step-by-step guide and bring you some tips as well.
So, let’s jump into it:
Table of Contents
How to Properly Operate a Pole Saw?
For the big trees, you need to use a pole saw. It is an easy way, and it takes less time. Before you start, you need to take some precautions. These are,
– Pole saw
– Safety glasses
– Gloves
– Helmet
– Workboots
After taking all these precautions, follow these steps to operate a pole saw adequately.
Step-1: Clear your work area
First thing first, you have to clear the area where you will go to work. You have to make your place less crowed.
If people keep entering, then it would be cause for an accident. You also have to clean the area of stumble hazard, or it would be difficult for you to move.
Step-2: Plan the place you will need to cut
Now mark the place or side where you will need to cut. Remove the risky items wherever you cut; otherwise, you may stumble.
Step-3: Locate the saw blade
Now locate the saw in that place where you are going to cut. Use both your hands fetch the pole, keep the saw in a vertical position, and control its weight. After cutting the spot, relocate the saw to your another cutting spot.
Step-4: Position Yourself
Now hold the saw and take it to that place you have its bottom at your chest level. Where you are going to stand, you should remember that you hold the pole saw in an angle from the cutting area to your position.
Or you can follow the pole manual to measure your perfect height with the pole saw.
Step-5: Start cutting with the pole saw
After prepare, you now start cutting. Do your first move with the saw very slowly and cut down the lower branches first. Start to remove the more tropical weeds or limbs.
Then gradually increase your speed and cut the whole units. When you are holding the saw, make sure that you can take its weight—now do this process as much as you need.
Step-6: Clean up the spot
After finishing your work, you need to clean up the place. Because all the removed branches will make your area dirty, and it can be dangerous for you to move.
Techniques and Safety Tips
When it is the matter of How To Use a Pruning Saw, safety should be your priority. Keep your mind calm and focus on your work spot. Do not rush and follow these precautions.
Eye Protection
While doing this, you have to wear safety glasses. Using the pole saw, there is evident that your eye gets injured with the bark of trees. So it is necessary to use safety glasses.
Branch Collar
When you are going to cut the branch collar, you must wear a helmet. If the removed branch has fallen on you, it may cause you an accident.
Power Line
When you are using an electric saw, make sure that the power line is far away from you, and the wire is big enough to reach you and ensure that there is no water around you.
Conclusion
Using a pruning saw is a tough job a little. But you have to practice to use it properly. There is various kind of pruning saw. All you have to choose the right one, read the manual correctly, and use it properly.
Therefore, while cutting the stems, follow the steps properly because now you know How to Use a Pruning Saw.
Have a good time!
Leave a Reply